Free 2-Day Shipping on Orders Over $50* – Limited Time Only

The Freestyle USA Mariner watch will take care of all of your digital concerns when you find yourself surrounded by miles and miles of big blue ocean.

  • Water resistance to 100 meters
  • Countdown timer to let you know when it's time to surface
  • Nightvision backlight so you can tell time on sneaky stealth missions
  • Reviews
  • Q & A

What do you think about this product?

Have questions about this product?

Face is a little large

  • Familiarity:I've used it once or twice and have initial impressions

The watch works well and is easy to read. However, I have somewhat smaller wrists and the face of it looks huge on my arm. I still have it, but ended up buying something else on Steep & Cheap that didn't look quite so silly.

Love Love Love

  • Familiarity:I've used it several times

I haven't bought too many watches and I wasn't sure if I would like this one, but I bought it and love it. It fits well and I can see what the time is without my glasses one. I wear it especially when I go diving so I know how long I was down and then figure out how long I should stay on the surface before my next dive. I recommend this watch to anyone that is a diver, it is pretty cheap and can do a lot.

Went from loving to liking

    Loved this watch right out of the box, fits well, the rubber has a nice feel and the blue/black is sharp. However, it is a little overpriced. The watch face is all plastic, although it seems decently solid. The one thing that really ticks me off is the band holder doesn't do the job, the extra strap pops out all day long, which really bugs me. I think part of the reason is the rubber, which is pretty grip-y. I went from loving it, to liking it pretty quickly. Not sure if I can handle the strap flop all day, so may be returning it...

    Went from loving to liking

    How easy is it to read the numbers on the...

    How easy is it to read the numbers on the black face/blue version

    does it have alarms and stop watch?

    does it have alarms and stop watch?

    Hey Gary, the Mariner comes with an Alarm as well as count up and count down timers.

    Here are some more specs:
    100 Meters H20
    Time / dual time
    Countdown timer w/ unique beep signals
    Repeat and count-up timer
    Alarm
    Nightvision backlight
    Durable silicone strap
    Hydro Pushers

    HERE YOU GO - EVERYTHING IT CAN DO!

    I particularly like the preset countdown timers on this watch plus it counts after you reach the set time so you know how much you went over!

    SPECIAL FEATURE:
    This Freestyle product features unique
    Hydro Pushers®: these pushers can be
    pressed under water to a dynamic water
    pressure (not water depth) of 3 ATM.
    DISPLAY MODES:
    The watch has four display modes: HOME
    TIME (T1)/FOREIGN TIME (T2), CHORONOGRAPH
    (CHRONO), TIMER and ALARM.
    To change from one display mode to
    another, press S2 button once.
    Note: In any setting mode, if there is no
    button pressed for a few minutes, the
    watch will automatically save the entered
    data and exit the setting procedure.
    HOME AND FOREIGN TIME DISPLAY:
    To display FOREIGN TIME mode, press
    and hold S1 button when HOME TIME
    mode is displayed. The mode description
    (T2) will be displayed and blink for
    approximately 5 seconds before switching
    to FOREIGN TIME mode. To change back
    to HOME TIME mode, press and hold S1
    button again.
    TO SET THE TIME AND CALENDAR:
    1. Press S2 button to select HOME TIME
    (T1)/FOREIGN TIME (T2) mode.
    2. Press and hold S3 button, the message
    “HOLD TO SET” will be displayed for
    approximately 3 seconds and the time
    zone setting will blink.
    3. Press S1 button to toggle between
    HOME TIME (T1) and FOREIGN TIME
    (T2) to set.
    4. Press S2 button, the hour digits will
    blink. Press S1 button to set the hour
    digits. Holding down the button will
    speed up the process.
    5. Press S2 button, the minute digits will
    blink. Press S1 button to set the minute
    digits. Holding down the button will
    speed up the process.
    6. Press S2 button, the second digits
    will blink. Press S1 button to reset the
    second digits to zero.
    7. Follow the same pattern to set the year,
    month and date.
    8. Press S2 button, the hour format setting
    will blink. Press S1 button to toggle
    between 12-hour and 24-hour format.
    The A.M. or P.M. indicator may be displayed
    to indicate the time period 12:00
    A.M. – 11:59 A.M. or 12:00 P.M. – 11:59
    P.M. respectively in 12-hour format.
    9. Press S2 button, the hourly chime
    (CHIME) setting will blink. Press S1
    button to toggle between ON and OFF
    for the hourly chime setting.
    10. When finished making all the settings,
    press S3 button to confirm.
    NOTE: The hourly chime setting will apply
    to both HOME TIME mode and FOREIGN
    TIME mode.
    TO USE THE CHRONOGRAPH:
    1. Press S2 button to select CHRONOGRAPH
    mode.
    2. The chronograph will then be displayed
    in its current state – stopped, running
    or reset.
    3. To resume a stopped counting, press
    S1 button to resume from where it left
    off.
    4. To start a new counting, reset the
    chronograph to zero first.
    Press S1 button to stop counting, then
    press S3 button to reset counter to
    zero.
    For the measurement of elapsed time:
    In CHRONOGRAPH mode,
    1. Press S1 button to start counting.
    2. To stop counting, press S1 button once.
    Press S1 button again to resume from
    where it left off.
    3. To reset to zero, press S1 button to stop
    counting and then press S3 button.
    For the measurement of split time:
    In CHRONOGRAPH mode,
    1, Press S1 button to start counting.
    2, While the chronograph is running,
    press S3 button once to register a lap.
    The split time of the registered lap will
    be displayed. The chronograph is still
    running in the background.
    3. To display the current elapsed time,
    press S3 button again.
    4. Repeat the last step until all the laps
    have been registered.
    5. To reset to zero, press S1 button to stop
    counting and then press S3 button.
    For the measurement of two finishes:
    In CHRONOGRAPH mode,
    1. Press S1 button to start counting.
    2. While the chronograph is running,
    press S3 button to register and display
    the time of the first runner. The
    chronograph is still running in the
    background.
    3. Press S1 button to stop and register the
    time of the second runner.
    4. Press S3 button to display the time of
    the second runner.
    5. To reset to zero, press S3 button again.
    NOTE: The chronograph can count up to
    a maximum of 23 hours, 59 minutes and
    59.99 seconds.
    NOTE: You can leave the chronograph
    running while switching over to other
    operating modes.
    TO SET THE TIMER:
    1. Press S2 button to select TIMER mode.
    2. Press S3 button, the message “HOLD
    TO SET” will be displayed for approximately
    3 seconds and the hour digits
    will blink.
    3. Press S1 button to alter the timer setting
    among 60, 55, 50, 45, 40, 35, 30, 25,
    20, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4,
    3, 2, and 1 minutes.
    4. Press S2 button, the “Action-at-End”
    setting will blink. Press S1 button to
    select among STOP AT END (STOP),
    REPEAT AT END (REPEAT) and COUNT
    UP AT END (UP).
    5. When finished making all the settings,
    press S3 button to confirm.
    NOTE: Definitions of Action-at-End setting
    option:
    a) STOP AT END – the timer will stop
    when the countdown reaches zero.
    b) REPEAT AT END – the timer will repeat
    the countdown when the countdown
    reaches zero.
    c) COUNT UP AT END – the timer will
    count up to a maximum of 23 hours
    59 minutes and 59 seconds when the
    countdown reaches zero.
    TO USE THE TIMER:
    1. Press S3 button to select TIMER mode.
    2. The timer will then be displayed in its
    current state – stopped, running, or
    reset.
    3. To resume a stopped counting, press
    S1 button to resume from where it left
    off.
    4. To start a new counting, reload the
    timer first.
    Press S1 button to stop counting, then
    press S3 button to reload the timer.
    5. When reaching zero in a countdown, a
    tune will be emitted. To stop the tune,
    press any button.
    NOTE: You can leave the timer running
    while switching to other operating modes.
    TO SET THE ALARM TIME:
    1. Press S2 button to select ALARM
    mode.
    2. Press and hold S3 button, the message
    “HOLD TO SET” will be displayed and
    the hour digits will blink. Press S1 button
    to set the hour digits. Holding down
    the button will speed up the process.
    3. Press S2 button, the minute digits will
    blink. Press S1 button to set the minute
    digits. Holding down the button will
    speed up the process.
    4. When finished making all the settings,
    press S3 button to confirm.
    NOTE: The alarm will automatically be
    activated after being set.
    TO TURN ON/OFF THE ALARM:
    In ALARM mode, press S1 button to toggle
    between ON and OFF of the alarm. When
    the alarm is ON, the alarm indicator
    will appear.
    WHEN AN ALARM GOES OFF:
    A 20-second alarm tune will be emitted
    at the designated time when the alarm
    is activated. To stop the tune, press any
    button.
    TO USE THE BACKLIGHT:
    Press S4 button to turn on the backlight

    What is the size of this watch. I am a big...

    What is the size of this watch. I am a big man with big hands - looking for something in the 48mm - 54mm range. Guide me to the appropriate model that has similar looks and appeal.