Find Your Store
Home Page

Cart, contains 0 items

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Expert Help
Earn Rewards

FOX Racing Shox
36 FLOAT 27.5 140 RC2 FIT Fork - 2015

Be the first to review

Out of Stock

Don't worry though, we have a lot more Mountain Bike 27.5in Forks in stock than that.

Shop Similar Products

Reclaiming its place.

Continuing the expansion of its new 2015 Float 36mm stanchion lineup, the new Fox 36 FLOAT 27.5 140 RC2 FIT Fork brings the company's revolutionary new fork chassis to a 140mm-travel length, making for a virtually perfect all-mountain companion.


The 36's chassis was the first area of scrutiny. The crown has been redesigned to be both lighter and lower, resulting in a shorter axle-to-crown measurement across the board, so that installing the fork means minimal — if any — alteration of the bike's front-end geometry, unlike when installing some other forks, including FOX's previous 36 series. The fork's lowers have been re-engineered to be lighter and stiffer, as well, resulting a chassis with greater rigidity, but weight figures that are very close to that of its smaller 34 series of forks. A newly formulated, higher-viscosity proprietary fork oil is now used, too.


The 36 essentially comes in two families: the adjustable TALAS versions and the non-adjustable FLOAT versions, like this one. On both, however, for 2015, the air spring systems have been revised. A reduced number of seals means that both operate more smoothly, but that's not all. TALAS springs have been re-tuned to ramp-up more toward full compression, making them more stable under big hits and extreme terrain, and thus friendly to more aggressive riders. The FLOAT forks now include volume-reducing spacers so that riders can fine-tune the system's ramp-up rate. The letters FIT designate that the fork is equipped with FOX Isolated Technology damper, which means that the fork's damper sits in an air-tight bladder, as opposed to a more common open bath system, making the damper more resistant to debris contamination and thus remaining smoother and more consistent between maintenance intervals.


The FLOAT acronym on the 27.5-inch 36 fork you see here stands for FOX Load Optimum Air Technology. It's not travel-adjustable on-the-fly like the TALAS version, but as mentioned, the volume of the FLOAT cartridge can be adjusted via internal spacers to more precisely dial in your preferred performance characteristics, in conjunction with the RC2 adjustment system. If you're wondering, the RC2 designation in the fork's title stands for Rebound, and the two different Compression settings (high-speed and low-speed) can be adjusted to dial the fork to your tastes.


The 2015 Fox FLOAT 36 27.5-inch 140 RC2 FIT Fork is for use with 27.5-inch wheels only, comes only in the color Black, and has a 1.125-1.5-inch tapered steerer tube. The new front axle system is convertible between both 15mm and 20mm thru-axles with included parts.


Travel
140 mm
Stanchion Material
Kashima-coated aluminum
Lower Material
magnesium
Wheel Size
27.5 mm
Steer Tube Diameter
1.125 - 1.5 in
Stanchion Diameter
36 mm
Damper
FIT
Axle
15 mm, 20 mm
Brake Compatibility
post mount
Claimed Weight
2000 g
Recommended Use
trail, all-mountain, enduro
Manufacturer Warranty
1 year

What do you think about this product?

View

Selecting an option will reload the available reviews on the page

Sorry, we don’t currently have any of those types of reviews for this product.