Limited time only! We are offering Free 2-Day Shipping on orders over $50 shipped within the contiguous United States….that’s the lower 48 to you and me. It will take two business days from the date of shipment for your qualifying order to reach you. The items that don’t qualify for Free 2-Day Shipping are kayaks, boats, paddle boards, rocket boxes & and car racks—anything that has to ship via freight methods. If you add a non-qualifying item to an order, your order will not qualify for Free 2-Day Shipping. If you are shipping to a PO Box, your order does not qualify for Free 2-Day Shipping. If you order a rack it will still qualify for Free Standard Shipping if the pre-tax value of the order is over $50. If your order is received before 5 PM Eastern Standard Time, we will make every effort to get it out the same day. Make sure to take Free 2-Day shipping into account when comparing prices. 2-Day Shipping must be selected inside the shopping cart.
The DAKINE Adjustable Tuning Iron gives you maximum wax coverage and absorption in a way that no thrift-shop iron can. A precise temperature adjustment ensures you melt instead of burn the wax, and DAKINE beveled the edges to provide smooth movement across the base.
i got it for christmas, used it the next day... it is great...
better priced than the high-end swix or toko ones, but they all do the same thing. Not a lot of crevices for wax to get stuck in which is good. Pretty easy to clean. Gets really hot really fast. Great value
As the center of gear knowledge, Backcountry.com wants you to be as informed as possible when buying high-end gear, and we've compiled price listings from some other reputable retailers for you to compare. Although we take steps to confirm this information is accurate and updated, we assume no responsibility for the accuracy of the price and shipping information provided by other vendors.
Yes it will but the temperature range for specific wax may/may not be attainable depending on how old the iron is. Plus the even distribution of the wax could be an issue if the bottom of the iron is porous or not completely flat.
An iron like the Dakine adjustable tuning iron is ideal because there are no holes like that on the surface of a regular iron. With a regular iron, wax builds up and gets inside and reheats again for the next time you use it. It doesn't sound like a big deal but fluorocarbons aren't the best thing to be breathing in anyway, much less an excess of them. Also, the range of temperatures on this thing are more precise/designed for waxing- how do you determine at what temp you should wax your board if all you have to choose from is cotton, linens or wools? Another point is packability, this is easier on your overall weight and space inside your baggage.
I've had mine for over a year and it's survived hundreds of waxes. Waaaaaay better than your mom's clothing iron thats for sure. The iron definitely runs a little on the hot side. Easy fix though, just turn the knob down a touch. Also, it heats up in seconds. In my opinion, it's not the best iron you could buy, but it is definitely the best for the price.
I got this iron to take with me when I'm traveling. I will agree with the previous reviewer that the temps are not accurate. If you need it to heat up your adjustments turn hot very fast. Some waxes will start smoking. If you are a temp weenie than I wouldn't recommend this iron. If you want a cheap inexpensive way to wax your board(s)and don't mind opening the windows (you should be waxing in a well ventilated area anyway.) then this is the choice.
I have been using this iron for about 3 years. It came as a part of my DaKine tunekit. It is simple to operate and effective. I have to agree with some of the other reviews that the temperature is a bit difficult to control. However, it has never done any base damage to my quiver due to carbonation or excessive heating. Most often the iron cools itself too quickly and is unable to melt the wax until the temperature is manually turned up. Overall for the price and my skill level this is perfect for the do it yourself tune.
Let me start off by saying this iron is affordable and has a nice smooth base that is needed for properly waxing your skis. It's light and cheap. Downside is the temp is not what you set it at. Higher temps are in fact hotter, and lower colder but not necessarily what degrees they say they are. I tested this after noticing it had trouble keeping a steady melt pole with the high temp wax I use on my best skis.
Using a laser thermometer, I set the dial to 130. Once the light turned off indicating the proper temp was reached, I turned on the laser and bam, 120. Egh not to bad, but them the temperature started a dance that went to ~155 and down to ~105, without moving the dial. Granted this might be worse than it will hit when it is on the ski and covered in wax (more insulated on the ski), but it explains why it has trouble keeping a steady melt pool with high temp wax.
Bottom line: works for low temp wax pretty well, but tends to send off some smoke because your temp is jumping to high, and then not melt as well because it got to cold 10 sec later. If you don't care about carbon in your wax and your bases getting a little to hot occasionally, this this iron is a great way to save money on tune ups! (read: cheaper skis this thing is a good deal)
If you want an iron that keeps temp well you need one with a good thermostat and a thicker metal base. More metal = easier for the iron to keep its temp where it is set.
all wax irons do this....unless you purchase a digital iron....or at least the digital iron will show clearly the fluctuations. Everyone I've known that tried to calibrate their iron as you did experiences the same thing- wildly facilating temps.
Temp seems a bit off at times, but that could be from working in the garage. Works much better than a standard clothes iron and is quite durable (this is my second one in 5 years and my first one easily waxed over 1000 boards). Great starter and travel iron. I wish there was a better mechanism to keep the cord up and out of the way.
Yes, you're going to want to wax your board. It's really pretty important to keep it in good shape. Waxing with an iron opens up the pours on your board and allows the wax to get into them enabling you to glide across the snow much faster. A coat of wax also helps protect your board from getting damaged, and from oxidating. You'll want an iron that has a temperature setting on it so you know how hot it is, because you can ruin your board if it gets too hot, and waxing won't work if it's not hot enough. As for wax, I use the Swix stuff they have on here. It's like $10 and it even tells you how hot to set your iron to wax w/ it. You can youtube "how to wax a snowboard" and find out how all the rest works.
Great iron for the price. Along with everyone else, the temps are inaccurate at times, but overall relatively steady. Gets hot quick, and does what any other waxing iron does I believe; just gotta be observant of the wax and if it is smoking or not (rare that this has happened to me though)
Do you know if this iron gets as hot as a regular iron. What I am trying to use it for is with perler beads. Its beads that you make into a pattern and then iron them into place using medium heat. But what I need is a square iron so I was wondering if this would work temperature uwise. It would definitely work shape wise. My email is robdunhour@hotmail.com. Maggie
Yes, this iron would get plenty hot enough to melt beads. I have one similar to this and it goes up into the 150 degree Celsius range which would be over 300 degrees F.
considering the cost of the other irons this one's pretty good it has a max temp of 140 celsius and melts the wax pretty quickly, spreads nicely does the job the handle's just a little uneasy if you put a lot a lot of pressure on it which you wont need to its kinda hard to clean too
For the price, its hard to be beat. Great little iron for the DIY'er at home. Done about 15 boards so far this season and it has yet to let me dow more...