Free 2-Day Shipping on Orders Over $50* - Limited Time Only

The Burton AK 3L Burn Softshell Jacket defends against Mother Nature’s nastiest weather without the straitjacket effect. Using Gore-Tex 3L construction in which a membrane that is heat-bonded directly between a softshell outer fabric and a fleece-like inner liner keep you impervious to wind and breathes exceptionally well. Burton’s Sig fit is roomy enough for layering but not oversized.

  • Articulated sleeves allow for freedom of movement and reduce overall weight
  • Jacket sleeves designed with a bit of extra length to fit over your gloves and keep the chill out when you strap into your bindings
  • Low-profile fulltime hood with micro adjust drawcord closure and face-covering capabilities
  • RiRi AquaZip water-resistant center front zipper uses a shingle-like design with a laminated construction to keep out wind and water
  • Gore-seam Tiny Tape utilizes both 8mm tiny tape and 13mm standard, in conjunction with Micro Grid Back technology, to reduce weight and bulk while increasing breathability in critical zones

Share your thoughts

What do you think of the

Burton AK 3L Burn Gore Softshell Jacket - Men's

? Share a...

Write a review

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

    Add a:
  • Share a photo
  • Share a video


Product Fit:

Add Your Size

in cm

Height (ft, in):

Weight (lbs):

Size Purchased:

Only jpg, jpeg, png, gif or bmp files please.

Submit Cancel
Now review from the App. Download

Here's what others have to say...

3 5

Should be better

I've only had the jacket out a few times so far as I had to leave to warmer climes for work.

Test conditions : Snow of course, -5 to -18 Celcius, 20 to 30km/h gusts, not much humidity(dry snow). Couple of decent wipe-outs.
The jacket material would seem to be capable of standing up to all it advertises.It's seems tough. It's seemed super wind-proof. Also waterproof (tested under the faucet as well for good measure.)

The problems I had were with the RIRI Auquazip, and hood-cinch pulls.While wearing my gloves I tried to pull the hood-cinch and ended up pulling the black plastic knob right off the string. It came pretty easily if you ask me. I didn't yank on it.
Also with gloves, I managed to pull the zipper-pull right out of the zipper-combiner (whatever it's called). Again, I don't think I pulled very hard. It's a stiff zipper and requires some force but I didn't reef on it.The RIRI zipper-pull actually has a strange design. I could re-attach it by pinching the forks that popped out and "plugging" it back in. But it should be built more solidly.
Anyway, I grabbed a key ring from the pass office and threaded that through the zipper-combiner eyelet and it works great now. I might get a smaller key ring and attach a lanyard to that.

The thumb loop / cuff deally works great when all done up nice and tight. But it obviously takes way longer to get it all snow proofed. And to get out of it. So if your in any kind of hurry to get a glove off and into a pocket or anything (eg. answer a phone quick), count on some extra time.
Pow skirt worked good. Not removable on this jacket.

Jacket looks great. I got the True Black(3L soft-shell), which is more like Charcoal and it worked good 'cause the jacket turned out to be a lighter shade of black than my pants. I ordered it blind.
I also picked the right size. Fit is good. I'm 6ft, 195, reasonably athletic but got a Canadian six-pack (beer gut). I got a large. I rocked a long sleeve thermal base layer and a cotton sweater from wal-mart in the conditions above, and I was warm all day. I have a 300gm zip hoody and it fits underneath for colder days. I didn't use it on the mountain but I tried it out and I didn't feel any bad stretching in the arms/shoulders/chest while "rolling up the windows" and other movements.
Looking forward to finishing up the season and getting some more use. If I come across anything else I'll post it.