Clothing

Outdoor Gear

Best Sellers

Average Reviews Community Rating | 3 Reviews

Bern Watts EPS Visor Helmet w/Knit Liner - 2010 BCS

Available Colors / Styles

Watts EPS Visor Helmet w/Knit Liner
Uploaded By:
Was this helpful?
Flag This Close

It’s said that an average human brain generates the roughly 25 watts of power during waking hours, but that number is bound to be significantly less following a traumatic brain injury. Keep your cranial power-meter turning strong with Bern’s Watts EPS Visor Helmet. Whether you snowboard, ski, bike, or skate, this brimmed lid helps keep your light bulb lit in the event of a crash.

  • EPS polystyrene is a lightweight, hard foam—when hit, EPS evenly distributes energy throughout its internal structure to keep your head intact
  • Sink Fit design fits the lid around your head (rather than on letting it ride on top), which provides both advanced comfort and an ultra-low profile
  • Removable knit liner allows for year-round action sport use—leave it in to fight off the winter chill and take it out when the weather warms up
  • Removable vent piece lets you air it out on warm days and trap in extra heat when it’s cold

Bottom Line: Eat vegetables; don’t be one.

Talk shop with all the gear freaks out there: ask 'em questions, upload/browse photos, and give your 2¢.

Hi, throw your review on the Product Wall to show your Gear-telligence.
Hi, got a question? Ask on the Product Wall.

I love this color combo with the white brim. but I want it with

I love this color combo with the white brim. but I want it with built in audio possible?
Thanks Ty

By:
December 18, 2010

Was this helpful? (0) (0)

Flag

Rating for this product: 4

nice lid

By:
April 16, 2011

Got this helmet for my first real snowboard trip out west. Nice stylish helmet. I have a deceptively large head so I had to get an XL. It was a little tight but fits OK. Worked great. I also plan on using it some this summer when mountain biking. Just swap out the knit winter liner other liner that is included.

Was this helpful? (0) (0)

Flag

Good Ole Watts

By:
December 13, 2010

Not probably the intended use of the Bern Watts, but it serves me well as a general use climbing/skiing helmet in the Sierra! Here seen without the knit liner, and with the included "spring weather" insert instead.

Was this helpful? (0) (0)

Flag Zoom

If I wanted to wear this without the knit liner should I step

If I wanted to wear this without the knit liner should I step down a size?
And what does "Hatstyle" mean?

By:
November 2, 2010

Was this helpful? (0) (0)

Flag

It comes with 2 liners, so just order the right size and choose which ever you like - knit liner for winter or just the inner cushion for summer. To wear the helmet without any liner and with a beanie would be unusual...

"Hatstyle" paint jobs are the multicoloured ones in the pics above that kinda look like baseball caps.

By:
December 13, 2010

Was this helpful? (0) (0)

Flag

No, unless you plan on wearing a thick beanie under it instead. Hat style refers to the paint job.

By:
November 2, 2010

Was this helpful? (0) (0)

Flag

Rating for this product: 5

Feel Confident with EPS

By:
December 11, 2010

I purchased this helmet for skiing and skateboarding. The included winter and summer liners are comfortable but personally I prefer using my own beanie instead of the liner for the snow. The sizing seems a bit small so I went a size bigger and did not regret it. My NewEra hat size is between 7 1/8 - 7 1/4 and I went with a Bern size Large. The EPS foam gives me added confidence when entering into a sketchy situation. The Brock Foam is great for small bonks but I had a bad concussion years ago and place a high value on whats inside the bucket. The helmet is comfortable and feels sturdy enough to handle some punishment. I also have a Giro Remedy S full face which I use on occasion but this helmet will get a lot more use in everyday type of situations.

Was this helpful? (0) (0)

Flag

1 Comment Last Comment: November 3, 2011 by:

By:
November 3, 2011

good info Im the same size

Flag

Was this helpful? (0) (0)

I need this helmet in an XL - the Matt black. Any chance it

I need this helmet in an XL - the Matt black. Any chance it will be coming in soon???

By:
November 1, 2010

Was this helpful? (0) (0)

Flag

Hey Betsy,

Actually, yes. There are some Matte Black/Black on the way with an ETA of 11/29/2010.

By: Backcountry.com Employee
November 2, 2010

Was this helpful? (0) (0)

Flag

Rating for this product: 5

Very Stylish Lid

By: Backcountry.com Employee
September 27, 2010

Love this helmet. Very stylish and well fitting. The helmet sits low on your head, more like a regular ballcap and less like a big dome. I've pulled out the ear pads and either wear a thin beanie or bandana underneath. There is a small gaper-gap with my Smith I/O, but that is remedied by the already mentioned under layer. I tried to wear the Watts over my goggles, but the brim would catch air when going fast and lift off my head. EPS and Hardhat cost the same, so I opted for (and would recommend) the certified, single impact EPS version. I've knocked my head around a little bit and the helmet hasn't busted so it's not a one-time-deal if you wipe out. But if you crash big, the EPS liner stands a better chance of keeping you awake. Lots of fresh colors are on the way!

Was this helpful? (0) (0)

Flag

Change me.

Out of Stock

Item: BRN0084

2010 Model No Longer Available

But don't stress, we have the latest model in stock.

Bern Watts EPS Visor Helmet with Knit Liner

Bern Watts EPS Visor Helmet with Knit Liner

Research other out-of-stock versions:

nice lid

4 star rating

By: Brian Everhart April 16, 2011

Got this helmet for my first real snowboard trip out west. Nice stylish helmet. I have a deceptively large head so I had to get an XL. It was a little more...

Feel Confident with EPS

5 star rating

By: Arthur Okoun December 11, 2010

I purchased this helmet for skiing and skateboarding. The included winter and summer liners are comfortable but personally I prefer using my own beanie more...

Add this to my Wish List  
This product has been added to XX List
Material:
[shell] ABS; [protection] EPS polystyrene 
Adjustable Vents:
yes, removablw vent cover 
Fit Adjustment:
chinstrap 
Certifications:
ASTM F 2040 and EN 1077B standards for snow and ski, CPSC and EN 1078 for bike and skate 
Weight:
1 lb 3 oz 
Recommended Use:
ski, snowboard, skate, bike 
Manufacturer Warranty:
1 year