- Home
- Ski
- Alpine Skiing
- Alpine Park and Pipe Skis
- 4FRNT Skis TNK Alpine Ski - 2008
Community Rating
4FRNT Skis TNK Alpine Ski - 2008 BCS
Available Colors / Styles
Detail Views
Be the first to upload your photo of the TNK Alpine Ski. >
The 4FRNT TNK Ski is all about the park and pipe. If you've got the skills, this ski will take you to the podium. Where other skis dampen the hard conditions and g-forces found in the park, the TNK turns them all the way up, for a ride 4FRNT says produces more power with less effort. Stiff and snappy like a carving ski, but with a near-center sidecut and stance for switch riding, this twintip is loaded for massive amplitude off the ramp and out of the pipe. LITEblock technology in the all-wood core decreases weight for faster spins but doesn't decrease the solid underfoot feel, so you can execute and land your unnatural tens with confidence and room to spare. 4FRNT equipped the TNK with a wider-than-average waist for stable takeoffs and landings, so while it's aimed towards serious park and pipe addicts, it will chop crud and float pow in a pinch.
Bottom Line: Pipe fiends make their mark on the amplitude meter with the 4FRNT TNK.
Talk shop with all the gear freaks out there: ask 'em questions, upload/browse photos, and give your 2¢.
I'm 5'7 160lb, which size should I get? thanks
I'm 5'7 160lb, which size should I get? thanks
By: yiucycle
September 1, 2009
Super Fast
By:
Jonathan Hackbarth
September 30, 2008
These ski's are super light, and bomb proof. The race base is key for cruising the groomed runs. They boost in the pipe and off jumps, lots of pop in these bad boys. They kill the park or pretty much anywhere on the hill.
I'm 5'11" 130 pounds I haven't skied a lot but
I'm 5'11" 130 pounds I haven't skied a lot but i want to, what size should i get?
By: dreadyboy
August 5, 2009
Probably the 175cm.
By: Shane O'Donnell
August 5, 2009
By: Kyle
September 2, 2009
just wondering, wats your age,weight, and height? Im a long time twintip skier, 6'2" 170, what size? Should i get 175 or 180 for the proper length? Or go really short with a 165, for good turning, and park/pipe?
Thanks
Im 6 foot 145 pounds.. And ski park all day erry day unless theres
Im 6 foot 145 pounds.. And ski park all day erry day unless theres powder. Should i go with a 180 or downsize to a 175? ...they'll be mounted at true center.
By: Tylerrr
July 7, 2009
Im 6'2" 170, should i go 180 too? (center mount). Would i be able to do a 165? Easier for park, better turning.?
By: Kyle
September 2, 2009
I would probably say mounted true center you could handle the 180, as mounting that way cuts the front end length down, making it ski like a shorter ski.
By: Shane O'Donnell
July 8, 2009
The Bombdiggity
By:
Matt Monahan
March 26, 2009
These skis are a blast, so much pop and good stiffness for jumping to avoid unneeded washouts. The textured top sheet prevents chipping so much, I have rode mine all year and have one barely noticeable chip and thats from a crash. If you're looking for an awesome jump ski, look no further.
Im 5.8 and weigh 135, but im still growing. what size should
Im 5.8 and weigh 135, but im still growing. what size should i get these, and are they the best twin-tip all mountain skis i can get for under approx $500?
By: JFleming
May 31, 2009
There maybe aren't the best ski, but they are way up there. I like 4FRNT personally and they make great skis. As for sizing, I would suggest the 175cm, because the 165 is too short already, and the 180 will be too long at least for the next couple years.
By: Shane O'Donnell
May 31, 2009
what are the dimensions of the 180cm ski?
what are the dimensions of the 180cm ski?
By: Bryan Wespiser
May 3, 2009
Dimensions ~ 115-89-111 @ 180cm
By: Shane O'Donnell
May 3, 2009
Where review at bro
By:
MrDalton
September 25, 2008
i submited a review but its not here... guess ill wait. Publick u wait 2 its comin if its not up in a few days i rite it again. just live 4 the 4 man. Thats all i got now. peace
Guys..at what point i have to drill this skis?! I think that
Guys..at what point i have to drill this skis?! I think that +2cm per label
By: atomic_bla2374489
October 3, 2008
^^^ Stop giving advice, you literally have no clue what your talking about.
Mount this ski at 1.5 cm back from center.
By: youvegotsm1267703
January 8, 2010
Go with the Rossignol SAS 2 140 or 120 or even the 150 or 200 but that might be too much din for you i recomend the 140 or 120 i have the 08 scratch 140s there great and the SAS 2 140 is the same as the Axial 2 140. SAS is just a name.
By: Steezyskibum
October 20, 2008
Guys..at who have it..please say about bindindigs?I think,that
Guys..at who have it..please say about bindindigs?I think,that i have to drill skis at +2 cm per center label.guys,please help me(but only who have it)
By: atomic_bla2374489
October 3, 2008
Like Alex said above, +2-3 cm from recommended mounting point is a great spot to mount if you plan on riding mainly in the park. You are pretty much dead center at that point.
By: Matt Monahan
March 26, 2009
I think you mean +2 cm over traditional. If you go + 2 cm over center, then you are planning on riding them switch all the time.I don't have them, but seeing as you haven't gotten a response in quite some time, I would say +2-3 cm over traditional is a pretty good setup if you are planning on doing spins / riding switch quite a bit. More for switch than spins.
By: Alex Cole
October 27, 2008
Change me.
Out of Stock
2008 Model No Longer Available
We have a lot more Alpine Park and Pipe Skis than that
Alpine Park and Pipe SkisResearch other out-of-stock versions:
Super Fast
These ski's are super light, and bomb proof. The race base is key for cruising the groomed runs. They boost in the pipe and off jumps, lots of pop more...
- Lengths:
- 155cm, 165cm, 175cm, 180cm
- Dimensions:
- [175cm] 112 / 86 / 108mm
- Turn Radius:
- [all] 23.1m
- Top Sheet:
- BOMBtop
- Core Material:
- LITEblock wood
- Base:
- Sintered 2000
- Tail:
- Twin tip
- Binding System:
- No
- Binding Included:
- No
- Weight:
- [175cm] 3lb 11oz (1678g)
- Recommended Use:
- Advanced to expert park and pipe
- Manufacturer Warranty:
- 1 Year